New Document
กก กก
Audio Evidence Audio Evidence high end audio systems including: Kondo/Audio Note Japan, DPS turntables, Art Loudspeakers, Simon Yorke Designs, Living Voice Loudspeakers, Loth-x, Mactone, 47 Labs and Nordic Concept Turntables. กก
HOME | ABOUT | REVIEWS & NEWS | PRODUCTS | CONTACT | RETAIL OUTLETS | Preowned / Used Hi Fi
High end audio systems including hi end stereo systems audio note kondo, Art Loudspeakers, Simon Yorke Designs, Living Voice Loudspeakers, Loth-x, Mactone, Schroder tonearms, DPS turntables, 47Labs and Nordic Concept Turntables Other Manufacturers  
Other Manufacturers
 
Sugden A21a Amplifier

 

Sugden A21a Amplifier

The Sugden A21 is a pure class A amplifier and best suited to the real music lover. It has a natural sound with great depth and the ability to communicate.

A real 'hair shirt' product it only has one purpose, to give listening pleasure. Every penny spent is to provide sonic quality and from this comes a reputation for reliability due to the quality of components used.

To match the sonic performance of the A21careful attention has been given to the CD21 compact disc player. To make a CD player sound as analogue as possible was our aim, whilst making sure it retained as much information as possible. Like the A21 we include a class a output stage with current feedback. Both units are wide-bandwith.

For people looking for an easy upgrade there is an 'add-on' power amplifier called the A21aP. This can be connected to the pre-amp out facility of the integrated unit.

Technical Notes for A21a Class A Integrated Amplifier

Transformer

Triple Secondaries, 1-For Phono/Line Stage 40VA, 2-One for each channel 60VA each

Main Capacitors Smoothing 1 x 10000uf 50volt per channel, Output decoupling 1 x 10000uf 50volt per channel
Power Supply
Single ended voltage rail
Output Devices 2-multi emitter NPN per channel
Circuit
  • Single ended Voltage rail
  • Push Pull output stage
  • All stages emitter follower
  • Cascoded driver stages to give maximum phase shifts.
  • All capacitors used in signal path are high-grade electrolytic (similar to Black Gate)
  • Resistors are 1% metal film with metal oxide emitter follower resistors.
Specification
  • Line input Frequency response 6Hz - 31kHz 30Hz
  • Separation -62dB
  • Noise -77dB
  • Distortion 0.01% 0.01%
  • Sensitivity 150mV 3mV (MM) 0.2mV (MC)
  • Dc offset 5mV
  • Power output 25Watts per channel pure class A

The English has been retained from the original English web site.

 

sugden_bijousugden_bijou2
Sugden Bijou

The SUGDEN HeadMaster is a dedicated Headphone Amplifier with exceptional qualities of musical performance. It has been specially developed to extend the boundaries of audio pleasure into the ultimate near-field listening conditions. It is suitable for use with most commercial headphones.

The unit is equipped with three stereo input facilities, a parallel tape output, and a switched pre amplifier output. These facilities create a very flexible piece of equipment, which can operate as a stand alone dedicated headphone system or be combined as a high quality pre-amp in a total Audio system. The special design features of the amplifier circuitry have been incorporated to enhance headphone performance but also facilitate a very high quality pre-amplifier performance.

The amplifier configuration is pure Class A constructed completely from discreet components. The application of the Class A circuit has been optimised to obtain its characteristic benefits of superb low level listening and low distortion. Particularly important to the use of headphones is the inherent avoidance with the Class A configuration of odd and high order harmonic distortion. The amplifier is wide bandwidth with a very neutral and transparent sound stage through the full musical spectrum and volume range.

The inputs of the amplifier are selected through a logic operated relay circuit to keep the input signal paths as short as possible. The relays used are twin gold contact bifurcated crossbar types [not solid state] with a contact resistance of less than 0.05 ohms. These relays, which are used in all Sugden Hi-End pre amps, are chosen for their non-invasive handling of the incoming signals. The single ended phono connectors are all high quality individual, gold plated connectors with Teflon inserts.

The housing for the electronics is creatively designed and precision engineered from high quality aluminium in our own manufacturing facility. The sculptured presentation as well as advancing pride of possession includes full practical and ergonomic considerations. Its mass is particularly relevant to headphone use and superb Audio performance.

Together with all Sugden products the acoustic qualities are enhanced by many hours of listening and component testing with the most sonically compatible selected for use. By not compromising on quality and continuity of production by our own skilled workforce we guarantee years of musical pleasure.

SEPCIFICATION

Inputs: Three stereo pairs.
Input Impedance: 50K
Input sensitivity: 150mv in for 1volt output
Outputs: Switched headphone socket / Attenuated Pre Amp out
Tape-out
Output Impedance: 4Ohms to 56kOhms
Power output: 5.5volts at onset of clipping
Bandwidth: -3dB points 10Hz & 270kHz
Frequency response:
relative to 1kHz 0dB, 20Hz -0.6dB, 30Hz -0.1dB 50Hz to 20kHz 0dB
Signal to noise: > 90dB
Dimensions: 230mm x 265mm x 82mm [wdh] weight 3.5kg

The English has been retained from the original English web site.

 

Sugden Masterclass Amplifier

 

Sugden Masterclass Amplifier

With over thirty years experience in design and manufacturing, the Masterclass AA power amplifier is by far the finest and most advanced Class A product from the Sugden factory. Like the Pre-amplifier this to is handcrafted with mechanical and electronic engineering of the highest standards. The sheer scale and presence of this amplifier generates confidence, offering a real insight into this remarkable 'musical instrument'. This class A design is possibly the most rewarding piece of audio equipment available in the world, at any price. The Masterclass AA conducts music in an effortless and natural way and is capable of producing a complete musical performance of incredible proportions. Power output should never be the prime consideration when purchasing an amplifier, but with 70watts of class A available specifications do sometimes matter.

SPECIFICATIONS
Frequency Response @ 1 Watt +/-0dB 15Hz - 30kHz -3dB Points 2Hz - 100kHz
Input Sensitivity 1 Volt For Full Output
Power Output 70 Watts Per Channel (Into 4 ohms)
Stereo Separation (Weighted) >90dB
Signal to Noise
>85dB
Distortion

1kHz @ 1 Watt Output 0.007%

10kHz @ 1 Watt Output 0.008%

Gain 26dB

The English has been retained from the original English web site.

 

New Document
Powered by Search Engine Marketing Firm EasyNet