lO-M
draws out of your discs richer strings sound, more real sound stage, more
natural voice, wider dynamic range, and much more musical details. You
will note very stable sounds thanks to the very firm structures.
Some more development based on the acoustic dynamics point of view
led us to realize the completely new structure. It has brought us
much higher quality of sound.
In order to draw IO-M's best performance, we recommend use of
our new preamplifiers M7 or ONGAKU developed with enhanced technology
which were taken in our latest amplifier engineering. Resultantly,
drawing out of analog discs fresh sounds, which could never been
imagined in the past, has become possible. So sensible people
in the world will be more excited with these new gears.
.
| SPECIFICATIONS |
| Cartridge type: |
Moving Coil |
| Output Voltage: |
0.12mV(1KHz,5cm per second) |
| Channel balance: |
within 1dB at 1KHz |
| Channel separation: |
greater than 25dB at 1KHz |
| Source impedance: |
1 Ohm |
| Compliance: |
60 × 10-6 cm/Dyne |
| Tracking pressure: |
2.0 ± 0.2g |
| Weight: |
11g |
|
FEATURES
1. From the coil windings to the output pins, only a pure silver path is used. The coil windings are made from silver that has been age annealed for ten years to provide mellowness for total music enjoyment
2.The magnetic circuit The IO-M uses a high performance AI-NiCo Magnet. The thick yoke is made from a soft iron with of very low carbon content. The iron is milled into the precise shape, rather than pressing in eider to prevent damage to the materials crystal structure. After milling the yoke is annealed to further assist in creating a smoothly controlled magnetic path.
The
English has been retained from the original Japanese English web
site.